 |
-
Ranges from 1 inches of water to 100 PSID
-
Accuracy ±0.5% of full span output
The series 616 differential pressure transmitters by Dwyer Instruments,
Inc. gives instrumentation buyers a wide selection of factory calibrated
ranges avoiding tedious, time-consuming field calibration in many cases.
Thirteen models cover ranges in inches of water column from 0-1 to
0-200 (0-0.75 to 0-50 kpa) and five models have PSID ranges from 0-10 to
0-100 PSID (0-69 to 0-690 kpa). All operate in 2, 3 or 4-wire systems (10-35
VDC) or 4-wire (16-26 VAC) and deliver a 4-20 mA output signal. Span and
zero controls are included for fine adjustment.
Designed for use with air and compatible, non-corrosive, non-combustible
gases, these transmitters feature dual-size barbed pressure connections
with fit both 1/8" and 3/16" I.D. rubber or vinyl tubing. Handy screw-type,
top mounted electrical connections are provided. Maximum pressure rating
varies with pressure range from 5-150 PSI (34 to 1034 kpa) and operating
temperatures limits are 20 to 120°F (-7 to +49c). Two 5/32" (4mm) mounting
holes are provided on 1-1/2" (38mm) centers. Weight is only 57 grams (2
oz.). |
Series
616 Differential Pressure Transmitter